.
Specification:
| No. | mm |  | kg/m | Cm |  | Cm |  | |||||||
| h | b | s | t | F | M | EY1 | EX3 | Jx | Jy | Lx | Ly | Wx | Wy | |
| 1 | 80 | 40 | 15 | 3.0 | 4.995 | 3.921 | 1.444 | 4.0 | 47.59 | 10.342 | 3.086 | 1.452 | 11.894 | 4.125 |
| 2 | 100 | 50 | 20 | 3.0 | 6.495 | 5.098 | 1.848 | 5.0 | 98.560 | 22.802 | 3.895 | 1.873 | 19.712 | 7.235 |
| 3 | 100 | 60 | 20 | 3.0 | 7.095 | 5.569 | 1.705 | 6.0 | 152.109 | 24.391 | 4.630 | 1.854 | 23.351 | 7.402 |
| 4 | 120 | 50 | 20 | 3.0 | 7.095 | 5.569 | 1.705 | 6.0 | 152.109 | 24.391 | 4.630 | 1.854 | 25.351 | 7.402 |
| 5 | 120 | 60 | 20 | 3.0 | 7.695 | 6.040 | 2.111 | 6.0 | 172.647 | 37.987 | 4.736 | 2.221 | 28.774 | 9.768 |
| 6 | 140 | 50 | 20 | 3.0 | 7.695 | 6.040 | 1.583 | 7.0 | 219.848 | 25.733 | 5.345 | 1.828 | 31.406 | 7.532 |
| 7 | 160 | 60 | 20 | 3.0 | 8.895 | 6.982 | 1.846 | 8.0 | 339.955 | 41.989 | 6.182 | 2.172 | 42.494 | 10.109 |
| 8 | 160 | 70 | 20 | 3.0 | 9.495 | 7.453 | 2.229 | 8.0 | 376.933 | 61.266 | 6.300 | 2.540 | 47.116 | 12.843 |
| 9 | 180 | 60 | 20 | 3.0 | 9.49 | 7.453 | 1.739 | 9.0 | 449.695 | 43.611 | 6.881 | 2.143 | 19.966 | 10.235 |
| 10 | 180 | 70 | 20 | 3.0 | 10.095 | 7.924 | 2.106 | 9.0 | 496.693 | 63.712 | 7.014 | 2.512 | 55.188 | 13.019 |
| 11 | 200 | 60 | 20 | 3.0 | 10.095 | 7.924 | 1.644 | 10.0 | 978.425 | 45.141 | 7.569 | 2.112 | 57.842 | 10.342 |
| 12 | 200 | 70 | 20 | 3.0 | 10.695 | 8.395 | 1.966 | 10.0 | 636.643 | 65.883 | 7.715 | 2.481 | 63.644 | 13.167 |
Specification:
| Sheet Thickness | 0.4~0.8mm | Roller Stations | 18-24 |
| Forming Apeed | 3~15m | Motor Output | 30HP |
| Length | 10Mx1.5M | ||
| Roller Shaft Dia | 75Ø | Single Head De-coiler | 5 Ton |
Specification:
| Sheet Thickness | 0.3~0.8mm |
| Forming Apeed | 15~20m Per Minute |
| Roller Shaft Dia | Dia. 75mm |
| Roller Stations | Up/Down 15~25 |
| Motor Output | 7.5~10HP |
| Length x Width | 10(L)mx1.4(W)m |
| Ingle Head De-Coler | 5T |